If you see the Windows Update error 0x8024401c in your computer when running the Windows Update, you run into a problem installing the updates and have no idea what to do. No worries! There are fixes to the issue.

How do I fix 0x8024401c in Windows? Try these fixes:

  1. Check the network settings
  2. Update drivers
  3. Modify the setting in Registry Editor
  4. Repair system files
  5. Perform a clean boot

Why does 0x8024401c happen on my computer?

Why does the error occur? the error 0x8024401c usually occurs when you have problems installing or downloading the Windows updates in your computer.

The causes generally are the improper Internet connection, or the server timed out waiting for the request. Another reason is likely because of the inappropriate device drivers in your computer.

You can try the methods below to fix 0x8024401c in your computer.

Note: All the screenshots below are shown on Windows 10, and the fixes apply to Windows 8 & 7.

Method 1: Check the network settings to fix 0x8024401c

As mentioned above, the network issue can cause the 0x8024401c error, so you can check the following two settings of the network to fix the error.

1. Switch network connection in your computer

As many people know, switching the network connection fixes the issue.

Thus, if you are connecting to WiFi in your computer, you can try switching the WiFi connection to wired connection or Ethernet connection and try the Windows Update to see if it works. If you are using the wired connection, you can change to WiFi connection, then try the Windows Update again to see if it works.

2. Uncheck IPv6 network

If switching your network doesn’t work, you can try to uncheck the IPv6 network, and make your computer go with IPv4 network. Follow the instructions to do that:

1) Right click the Internet Icon at the bottom right corner on your computer, and click Open Network & Internet settings.

2) Click Network and Sharing Center

3) Click Change adapter settings.

4) Right click the network connection (LAN, Ethernet or WiFi) that you are currently connecting, then click Properties.

5) In the popup pane, uncheck Internet Protocol Version 6 (TCP/IPv6). Then OK to save the setting.

6) Restart your computer and try to update your Windows again.

Method 2: Update drivers to fix 0x8024401c

The missing or outdated drivers in your computer can also stop the Windows Update from working, so you can update the drivers in your computer to fix it.

There are two ways you can update the drivers: manually or automatically

Manual driver update – You can update your drivers manually by going to the manufacturer’s website and searching for the most recent correct driver. 

Automatic driver update – If you don’t have the time, patience or computer skills to update your network card driver manually, you can, instead, do it automatically with Driver EasyDriver Easy will automatically recognize your system and find the correct drivers for it: 

1) Download and install Driver Easy.

2) Run Driver Easy in your computer, and click Scan NowDriver Easy will then scan your computer and detect any problem drivers.

3) Click the Update button next to the flagged network card to automatically download and install the correct version of its driver (you can do this with the FREE version).

Or click Update All to automatically download and install the correct version of all drivers that are missing or outdated. (This requires Pro version – You’ll be prompted to upgrade if you click Update All.)

4) After updating all the drivers, restart your PC and try Windows Update again.

Method 3: Modify the setting in Registry Editor to fix 0x8024401c

You can try to modify the settings in Registry Editor to fix Modify the setting in Registry Editor to fix 0x8024401c in your computer. Follow these steps:

1) Press the Windows logo key + R at the same time on your keyboard.

2) Type regedit in the Run box, and click OK.

3) Go to HKEY_LOCAL_MACHINE > Software > Policies > Microsoft > Windows > WindowsUpdate.

4) Click AU in WindowsUdpate, and find UseWUServer.

5) Replace whatever is in the registry value data on the right pane with 0 (zero).

6) Click OK to save.

7) Restart the computer and try to install the update again.

Method 4: Repair system files

The 0x8024401c error may be related to system files. When the system files were broken or corrupted, it may cause a Blue screen issue.

There are 2 ways to solve it. Here’s how:

  • Option 1- Automatically (Recommended)
    Use a repair tool to check various areas in your computer to determine the cause of Windows common issues. It will deal with issues related to system errors, critical system files and find the right fix for you.
  • Option 2 – Manually
    System File Checker is a built-in tool to check for corrupt, damaged system files and manage to restore them if there’re any. However, this tool can only diagnose major system files, and won’t deal with damaged DLL, Windows Registry key, etc.

Option 1 – Automatically (Recommended)

Reimage (commonly known as Reimage Repair) is a computer repair software that can diagnose problems on your computer and fix them immediately.

It is tailored to your specific system and is working in a private and automatic way. It will firstly check hardware-related issues to identify problems, and then security issues (powered by Avira Antivirus), and finally it detects programs that crash, missing system files. Once complete, it will find a solution to your specific problem.

Reimage is a trusted repair tool and it will do no harm to your PC. The best part is that you won’t need to worry about losing any programs and your personal data. Read Trustpilot reviews.

1) Download and install Reimage.

2) Open Reimage and run a free scan. This may take a few minutes.

3) You’ll see the summary of detected issues on your PC. Click START REPAIR and all the issues will be fixed automatically. (You’ll need to purchase the full version. It comes with a 60-day Money-Back Guarantee so you can refund anytime if Reimage doesn’t fix your problem).

Note: Reimage comes with 24/7 Technical Support. If you need any assistance while using Reimage, click the question mark on the upper-right corner of the software, or use one of the following:

Chat: https://tinyurl.com/y7udnog2
Phone: 1-408-877-0051
Email: support@reimageplus.com / forwardtosupport@reimageplus.com

Option 2 – Manually

The SFC (System File Checker) is a Windows utility that helps automatically check and repair the corrupted or incomplete system files, so you can run an SFC scan in your system and let it be automatically repaired if there are any issues.

1) Type cmd in the search box.

2) Right-click Command Prompt, and select Run as administrator.

3) Type sfc /scannow in the window, and press Enter.

4) This process can take some time, and it will try to automatically fix the issues after scanning. So don’t close the window until verification 100% complete. After it’s completed, restart your PC and try updating Windows again.

Method 5: Perform a clean boot

You can perform a clean boot in your system. Try the steps:

1) Press the Windows logo key + R at the same time on your keyboard.

2) Type msconfig in the Run box and click OK.

3) Click the Services tab, and check the box next to Hide all Microsoft services.

4) Click Disable all, then click OK.

5) Restart your system and check for the updates.

These are the useful methods to fix Windows Update error 0x8024401c. If you have any further questions, feel free to comment below and we’ll see what more we can do to help.

114 people found this helpful

Available in other languages

Wird die Suche nach Windows-Updates abgebrochen und bekommen Sie einen Fehler mit dem Code 0x8024401c? Hier finden Sie dagegen 5 Lösungen.